Wharfedale DM4.0 Microphone

Wharfedale DM4.0 Microphone Product Detail

The DM4.0 is a dynamic moving coil microphone designed to handle a wide variety of vocal and instrument applications for both live sound and recording. This microphone is also available with an integral on/off switch (model DM4.0S). Characteristics of the DM4.0, such as a tight super-cardioid pickup pattern with a frequency response of 45Hz - 18kHz, slight bass proximity and mid range presence result in a warm and natural sounding response for every application. The DM4.0 is engineered to handle very high source levels without distortion and provides over 36dB of off axis feedback rejection. Low impedance and balanced output allow for interference free performance. The DM4.0 is built solidly with a cast alloy body, steel mesh grille ball and internal pop screen.

The DM4.0 and DM4.0S are available either as a single mic, or as a pack of three microphones. The single pack contains one microphone with stand adaptor as well as a 4.5 meter XLR-XLR cable. The pack of microphones is supplied in a hard wearing carry case and contains three microphones with stand adaptors and screws.

APPLICATIONS:
Live Stage

• Clubs
• Houses of Worship
• Corporate
• Presentations
• Karaoke

Instruments

• Electric guitar amplifiers
• drums, horns, percussion

Home Studio

• All vocal and instrument applications

DM-4.0 SPECIFICATIONS

• Frequency Response: 45Hz-18KHz
• Weight: 330grams
• Output Impedance: 250ohms
• Transducer Type: Dynamic
• Polar Pattern: Super-Cardioid
• Sensitivity: -53db (OdB=1V/Pa)
• Off axis rejection: >25dB at 125 degree
• Maximum SPL: >136dB
• Cable/Connector: 3 pin gold plated male XLR
• Polarity: Positive voltage on pin 2 relative to pin 3 of output XLR connector
• Housing: Zinc alloy
• On/Off Switch: DM4.0S