Buy with confidence: We're the 1st, and only, UK guitar retailer to offer a 3-year warranty & 30-day exchange as standard.
SE Electronics sE4400 Condenser Microphone
Was £419.00 Save £90.00
£329.00
In Stock
7 AvailableOrder before 4PM for FREE Delivery Tomorrow
Includes 30-Day Exchange & 3-Year Warranty
Manufacturer's ID: SE4400
CLASSIC VERSATILITY AT ITS FINEST
Hand-crafted with the highest attention to detail, built with a roadworthy die-cast all-metal housing, metal switches, and rugged spring steel wire mesh grille that can take a beating during day-to-day tour life. The sE4400 appeals with its down-to-earth elegance, offering discrete electronics prioritizing the features you really need.
Highlights
- Hand-crafted true condenser capsule individually tuned in our own factory
- Classic vintage sound and all-metal housing
- Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
- Innovative close-miking shockmount
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
Specification
| Capsule | Hand-crafted 1" Gold-sputtered True Condenser |
| Diaphragm | Gold-sputtered mylar |
| Connectivity | 3-pin male XLR connector |
| Powering | 48V Phantom Power (P48 according to IEC 61938) |
| Polar Patterns | Cardioid, Hypercardioid, Omni-directional, Figure-8 |
| Frequency Range | 20 Hz - 20 kHz |
| Sensitivity | 25 mV / Pa (-32 dBV) |
| Max SPL | 137 / 147 / 157 dB (0/10/20 dB Attenuation pad - 0.5% THD) |
| Equivalent noise level | 13 dB(A) |
| Signal to noise ratio | 81 dB |
| Low-Cut Filter | 40 / 80 Hz, 6 dB/Oct, switchable |
| Attenuation pad | 10 / 20 dB, switchable |
| Dimensions | |
| Mic weight | 290 g (10.23 oz.) |
| Mic length | 146 mm (5.75 in.) |
| Mic Width | 58 mm (2.32 in.) |
| Mic Diameter | 29 mm (1.10 in.) |
| What's in the box | sE4400 microphone |
| Custom shockmount + thread adapter | |
| Metal case | |
| Recommended Use | Lead vocals, orchestral + strings, drums, overheads, electric guitar cab, piano, acoustic guitar, woodwinds, brass |
