Shure GLXD24UK/SM58 Digital SM58 Vocal Wireless System

Specification

• General Specifications
• Tuning Bandwidth: 2400–2483.5 MHz
• Working Range: 60 m (200 ft) typical, Note: Actual range depends on RF signal absorption, reflection and interference.
• Transmit Mode: Frequency Hopping
• Audio Frequency Response: 20 Hz – 20 kHz, Note: Dependent on microphone type
• Dynamic Range: 120 dB, A-weighted
• RF Sensitivity: -88 dBm, typical
• Total Harmonic Distortion: 0.2%, typical
• RF Output Power: 10 mW E.I.R.P. max
• Operating Temperature Range: -18°C (0°F) to 57°C (135°F), Note: Battery characteristics may limit this range.
• Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)
• Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output.
• Battery Life: Up to 16 hours
• GLXD4
• Dimensions: 40 x 183 x 117 mm, H x W x D
• Weight: 286 g, without batteries
• Housing: Molded Plastic
• Power Requirements: 14 to 18 V DC (Tip positive with respect to ring), 550 mA
• Spurious Rejection: >35 dB, typical
• Gain Adjustment Range: -20 to 40 dB in 1 dB steps
• Phantom Power Protection: Yes
• Configuration
• XLR Output: Impedance balanced
• 6.35 mm (1/4") output: Impedance balanced
• Impedance
• XLR Output 100 O
• 6.35 mm (1/4") output: 100 O, (50 O, Unbalanced)
• Maximum Audio Output Level
• XLR connector (into 600 O load): +1 dBV
• 6.35 mm (1/4") connector (into 3 kO load): +8.5 dBV
• Receiver Antenna Input
• Impedance: 50 O
• Antenna Type: ½ Wave Sleeve Dipole, non-removable
• Maximum Input Level: -20 dBm
• GLXD2
• Dimensions
• Weight: 267 g, without batteries
• Housing: Molded Plastic
• Power Requirements: 3.7 V Rechargeable Li-Ion
• RF Output Power: 10 mW E.I.R.P. max
• Maximum Input Level: 146 dB SPL