Buy with confidence: We're the 1st, and only, UK guitar retailer to offer a 3-year warranty & 30-day exchange as standard.
Walrus Audio Fundamental Series Chorus
Spring Sale
![Walrus Audio Fundamental Series Chorus]( "Walrus Audio Fundamental Series Chorus")
![Walrus Audio Fundamental Series Chorus]( "Walrus Audio Fundamental Series Chorus")
Image Gallery
Was £125.00 Save £26.00
£99.00
In Stock
Order before 1PM for Delivery Tomorrow
Includes 30-Day Exchange & 3-Year Warranty
Manufacturer's ID: 64196
For the Fundamental Series, we challenged ourselves to design a set of pedals with the tonal integrity that’s required to live on a professional’s pedalboard, but with simplified controls friendly enough for even the newest effect pedal users. Each Fundamental pedal has 3 sliders for tweaking the sound and a three-way switch for changing pedal modes. The result is a line of 8 pedals that will keep you covered from your first band practice all the way to a sold-out arena. Designed and assembled at Walrus Audio headquarters in OKC, OK.
The Fundamental Chorus is a digital emulation of a classic analog chorus, recreating bucket brigade modulation. With 3 types of chorus algorithms to select from, you can get sounds ranging from gentle modulation to 80's tri-chorus.
Specification
- Rate: Control the rate of the modulated LFO.
- Depth: Control the depth of the modulated LFO.
- Mix: Control the mix of the effect and the original clean signal. All the way to the left is fully clean, and all the way to the right is fully Reverb.
- Slide Switch – The slide switch allows you to change between 3 different flavors of the pedal.
- Light – Emulates a traditional analog chorus.
- Medium – Adds multiple taps to further modulate a classic chorus.
- Heavy – Emulates a classic Eighties effect, the LCR tri-chorus.
- Bypass Switch – Turns the effect on and off. Hold down to engage tap mode. Hold down again to disengage tap mode.
- Bypass LED - Illuminated when the effect is engaged, and will blink with tapped tempo when tap mode is engaged.
- Trails Modes – Hold down the stomp switch when applying power to the pedal.
- Input Jack - 1/4 inch cable from instrument.
- Output Jack - 1/4 inch cable to amplifier.
- 9v Jack – 9-volt DC, Center Negative, 100mA min.