Manufacturer's ID: GLXD24UK/SM86-Z2
The SM Digital Wireless Vocal System with SM86, an extended high frequency response microphone capsule for smooth lead vocal reproduction, combines automatic frequency management with true digital diversity for a rock-solid wireless signal with exceptional digital audio clarity.
Specification
- General Specifications
- Tuning Bandwidth: 2400–2483.5 MHz
- Working Range: 60 m (200 ft) typical, Note: Actual range depends on RF signal absorption, reflection and interference.
- Transmit Mode: Frequency Hopping
- Audio Frequency Response: 20 Hz – 20 kHz, Note: Dependent on microphone type
- Dynamic Range: 120 dB, A-weighted
- RF Sensitivity: -88 dBm, typical
- Total Harmonic Distortion: 0.2%, typical
- RF Output Power: 10 mW E.I.R.P. max
- Operating Temperature Range: -18°C (0°F) to 57°C (135°F), Note: Battery characteristics may limit this range.
- Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)
- Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output.
- Battery Life: Up to 16 hours
- GLXD4
- Dimensions: 40 x 183 x 117 mm, H x W x D
- Weight: 286 g, without batteries
- Housing: Molded Plastic
- Power Requirements: 14 to 18 V DC (Tip positive with respect to ring), 550 mA
- Spurious Rejection: >35 dB, typical
- Gain Adjustment Range: -20 to 40 dB in 1 dB steps
- Phantom Power Protection: Yes
- Configuration
- XLR Output: Impedance balanced
- 6.35 mm (1/4") output: Impedance balanced
- Impedance
- XLR Output 100 O
- 6.35 mm (1/4") output: 100 O, (50 O, Unbalanced)
- Maximum Audio Output Level
- XLR connector (into 600 O load): +1 dBV
- 6.35 mm (1/4") connector (into 3 kO load): +8.5 dBV
- Receiver Antenna Input
- Impedance: 50 O
- Antenna Type: ½ Wave Sleeve Dipole, non-removable
- Maximum Input Level: -20 dBm
- GLXD2
- Dimensions
- Weight: 267 g, without batteries
- Housing: Molded Plastic
- Power Requirements: 3.7 V Rechargeable Li-Ion
- RF Output Power: 10 mW E.I.R.P. max
- Maximum Input Level: 146 dB SPL
