Available for Pre-OrderPlace your order today and we will email you when we have an estimated delivery date.
Frequently Bought Together
Manufacturer's ID: 650415211999
What we say:
At A Glance:
The AT+ by JHS is the signature overdrive pedal for rock legend Andy Timmons. With soaring overdrive tones, wattage tone switching and a footswitchable boost, the AT+ is one of our favourite overdrives!
Features We Love:
Who Is It For?
Guitarists looking big rock tones are going to love the AT+! Great for gutsy riffing and tight enough for shredding to sound clear, the AT+ is tailored for players who have a bit of flair. The addition of the boost channel brings a new dimension to your tone and works great for bringing in a little extra gain to make melodic leads sing.
As a member of 80s rock legends Danger Danger, Andy toured the world with Kiss and Alice Cooper and sold over a million records. After moving on from Danger Danger, Andy worked as the musical director for Olivia Newton-John, recorded with Kip Winger and participated in the G4 Experience guitar camp with Joe Satriani and Paul Gilbert.
The switch at the top of the pedal is one of our favourite features of the AT+ and changes the pedal's character to mimic the sound of 25-watt, 50-watt and 100-watt amplifiers. With 25-watt sounding compressed, saturated and with a lower output, 50-watt sounding a little more open but less compressed and 100-watt having loads of volume and an open crunch, it's quick way refine your tone for different situations.
- Boost switch makes this act like two pedals in one
- It's a tasteful distortion that remains clear for fast playing
- JHS The AT+ Andy Timmons w/ BOOST
DOES THE AT+ SOUND THE SAME AS THE ORIGINAL AT?
Yes! The drive channel of the AT+ is identical to our original AT pedal. No changes were made whatsoever and the controls remain the same. They include Volume, EQ, Drive, Air, and a three-way toggle for 25-watt, 50-watt, or 100-watt modes. The Volume gives you plenty of headroom to play with, while the Drive control has a wide range from high gain blues to thunderous distortion. The tone controls work together to give you the ability to shape your tone and sit perfectly in a mix. The EQ works as a standard bright/dark tone control, while the Air control rolls in top end like a presence control so you can have just the right amount of brightness for articulation and clarity. The three-way toggle gives you the feel of different wattage amplifiers. The up position is the 25-watt setting with the most compression and saturation with the least amount of volume. The down position is the 50-watt setting for a good balance of compression and openness. The middle position is the 100-watt position for tons of volume and open crunch while being less focused.
TWO CHANNELS ARE BETTER THAN ONE!
New to the AT+ is an independent foot-switchable Boost...essentially creating a second channel and gain stage for the pedal. The boost side of the AT+ is a slightly dirty and overdriven pre-boost that allows you to hit the front end of the AT drive channel and achieve more saturation and definition for applications where you need more. Since the Boost is independent, it can be used alone to drive your amp or other drive pedals in conjunction with the AT+ drive channel.
THIS PEDAL REQUIRES STANDARD 9V DC NEGATIVE POWER, CONSUMES 15 MA, AND MEASURES 2.2"X4.8"X1.6".
YOU CAN SAFELY RUN “THE AT“ AT 18 OR 9 VOLTS