Catalinbread Dreamcoat Pre-Amp

£159.00 In Stock

Delivery on Thursday

Click and Collect available

Catalinbread Dreamcoat Pre-Amp

£159.00

In Stock

10+ Available

Order now for Delivery on Thursday

3-Year Warranty Included

We're the 1st, and only, UK guitar retailer to offer a 3-year warranty as standard. Buy with confidence today. Learn More

Make 3 payments of £53.00 No fees. Learn more

Delivery on Thursday

With 1 hour Delivery slot

Click & Collect

Live Stock levels from all our stores.

Store
Availability
Edinburgh
In Stock, Collect Tomorrow
Glasgow
In Stock, Collect Tomorrow
Newcastle
In Stock, Collect Tomorrow
Birmingham
In Stock, Collect Tomorrow
Epsom
In Stock, Collect Tomorrow
Camden
In Stock, Collect Tomorrow

What began as an exploration of a deeply specific '60s and '70s English classic rock tone, evolved into a multidimensional gain machine capable of anything between unruly sputtery fuzz and classic rock chime. This is not meant to make you sound like a classic rock god, it is meant to inspire you from using some of the same tools they used that would otherwise be inaccessible in pedal form. The heart and soul of the Dreamcoat is a near-exact recreation of the preamp circuit from the Aiwa TP-1011 reel-to-reel deck that can be found in '60s and '70s classic rock recordings. All of the functionality of that unit is present, from sparkling cleans to powerful crunch and glassy leads, but the “Sat” control gives you an extra layer of grunt, allowing the Dreamcoat to range between near-dry tonal indifference to complete “melting-amp” Neil Young-esque tweed sounds.

A certain classic rock sound wasn’t just a tape deck, though. The famous user of this tape deck also installed a passive inductor-based frequency “booster” into his guitar that cut both sides of the spectrum around the resonant frequency of their guitar pickups, giving the appearance of a frequency boost installed a passive inductor-based frequency “booster” into their guitars that cut both sides of the spectrum around the resonant frequency of their guitar, giving the appearance of frequency boost. To that end, we’ve added a frequency booster circuit that doesn’t cut anything, giving you a richer tone with a little oomph where it counts. To top it all off, we’ve included a clean blend circuit that begins after the frequency boost and ends after the tape preamp, so you can EQ the sum of your clean tone and dirt, all while preserving your pick attack and presence. The whole shebang runs at 20V, just a hair higher than the original Aiwa, expanding its capabilities and delivering tons of headroom.

Specification

Power Supply

The Dreamcoat requires a 9V power supply center-negative and draws 44mA. Any more current than that is A-OK, but you can’t exceed 9V without letting the smoke out. Bad things will happen, including but not limited to shouting expletives and more importantly, voiding your warranty.

Measurements

Current draw  44mA
Input impedance  >1MΩ
Output impedance  <5KΩ
Dimensions  4.33” X 2.36” X 1.93”
Weight  0.4 lbs

 

Controls

Freq: This controls the amount of boost at a specified frequency band, from 2.4KHz to 5KHz, which you set with the internal trimmer. When the knob is fully counter-clockwise, it's out of the circuit. When you turn it up all the way, you'll get a full 10dB boost at the selected frequency. Warning: a little goes a long way with this control as ~4KHz is where pink noise and other unpleasantries live.

Blend: This control blends the signal coming out of the Freq control with the Aiwa deck circuit. Nudge it south-of-max to gain back some of your pick attack, and turn it all the way down to hear just the EQ'd dry signal. When all the way down, make sure you turn your master up to compensate and vice versa. When your Sat and Mic Vol are cranked and your Blend is just above 0, the resulting dynamic between your dry signal and thosemore extreme splatty Dreamcoat settings create a truly unique tone.

SAT: Controls the amount of feedback present in the first stage of the Aiwa unit. You can think of it as a "gain range" control. Thiscontrol was not included on the original unit and was set to a fixed value. The default setting on the original is a hair past noon, everything else is extra. If you find that you are getting too much sputter, turn this control down.

Mic Vol: This is the original "distortion" control of the Aiwa deck and controls te total "distortion" of the circuit.

Master: You know what this does. You will never want for volume with the Dreamcoat, it can get punishingly loud. After all, the Aiwa was meant to drive speakers! As you adjust the Blend control, you may need to turn this up.

Under the Hood

The famous user of the AIWA TP-1011 tape deck had this passive "boost" tailored to the resonant frequency of their guitar, accentuating pinch harmonics. You may want to spend some time dialing this in. This is definitely a "set-it/forget-it" type of control,as you dial it to suit yourguitar best. Of course, you can experiment with different frequencies and let the FREQ knob do the talking.