Buy with confidence: We're the 1st, and only, UK guitar retailer to offer a 3-year warranty & 30-day exchange as standard.
Walrus Audio Fundamental Series Distortion
Spring Sale
![Walrus Audio Fundamental Series Distortion]( "Walrus Audio Fundamental Series Distortion")
![Walrus Audio Fundamental Series Distortion]( "Walrus Audio Fundamental Series Distortion")
Image Gallery
£99.00
In Stock
Order before 1PM for Delivery Tomorrow
Includes 30-Day Exchange & 3-Year Warranty
Manufacturer's ID: 64198
For the Fundamental Series, we challenged ourselves to design a set of pedals with the tonal integrity that’s required to live on a professional’s pedalboard, but with simplified controls friendly enough for even the newest effect pedal users. Each Fundamental pedal has 3 sliders for tweaking the sound and a three-way switch for changing pedal modes. The result is a line of 8 pedals that will keep you covered from your first band practice all the way to a sold-out arena. Designed and assembled at Walrus Audio headquarters in OKC, OK.
The Fundamental Distortion is a 3-mode distortion. It covers a wide range of sounds from dark and doom through sharp cutting leads.
Specification
- Gain – The Gain slider sets the amount of gain applied to your guitar signal passing through the fuzz circuit.
- Tone – The Tone slider controls the frequency response of the signal after distortion. Below center boosts highs and above center cuts highs.
- Volume – The Volume slider sets the overall output volume of the pedal.
- Slide Switch – The slide switch allows you to change between 3 distinct flavors of the pedal. Each position has different clipping modes or tone profiles.
- Dark - Asymmetric silicon clipping with added high-frequency cut. Think dark and dynamic.
- Si - Classic silicon hard clipping diodes. Things get compressed and crunchy.
- LED - LED hard clipping diodes. A dynamic and crunchy sound.
Note: The LED clipping mode will be louder due to the nature of the LEDs, so use your volume slider to compensate! - Bypass Switch – Turns the effect on and off.
- Bypass LED - Illuminated when the effect is engaged.
- Input Jack - 1/4 inch cable from the instrument.
- Output Jack - 1/4 inch cable to amplifier.
- 9v Jack – 9-volt DC, Center Negative, 100mA min.