Maestro Pedal Deal - Save £445

Invader Distortion Effects Pedal

The Invader is a high-gain, all-analog modern distortion pedal with an aggressive, dominant sonic character and rich harmonics, generating a wide range of distorted sounds. The 3 -knob control layout offers intuitive control over Gain (distortion amount), Tone, and output Level, with more than enough volume on tap to easily exceed unity gain when d desired. Players can also engage a built -in noise gate with the top panel toggle switch. An internal trim p ot mounted on the circuit board inside the pedal allows adjustments to the level of the noise gate’s Threshold. The true bypass footswitch triggers the LED lights in the bugles in the Maestro logo when it’s on, so you’ll always know when the effect is active. 

• Controls: Gain, Tone, Level; internal Noise Gate Threshold trim pot
• Internal Trim Pot: An internal trim pot on the circuit board allows the user to adjust the level of the Noise Gate’s Threshold. Using a small screwdriver, turn this control up for a higher Threshold level, and down for a lower Threshold level.
• Switches: True Bypass footswitch, Gate On/Gate Off toggle switch
• LED Indicators: Red, yellow, and blue bugles in the Maestro logo illuminate when the pedal is active
• Signal Processing: All-Analog
• Power Requirements: 9V battery or regulated 9-12*VDC power supply (5.5 x 2.1mm plug, wired center -negative) *Running the pedal at 12V provides increased headroom
• Power On Switch: Incorporated into the input jack. Unplug the input when not in use to prevent battery drain. Remove the battery when the pedal is going to be stored for long periods to prevent leakage and damage.
• Input Impedance: 100K ohms
• Output Impedance: 100 ohms
• Switching: True Bypass
• Dimensions (D x W x H): 5.04” x 3.45” x 2.5”, including feet, knobs, jacks, etc
• Weight (Including Battery): 1.1 lb. / 498.95 gm.

Discoverer Delay Effects Pedal

The Discoverer is a modern analog delay pedal that proudly utilizes legendary analog b ucket brigad e d evice (BBD) technology to deliver classic, warm, and inviting delay sounds. The intuitive 3 -k nob control layout lets users q uickly dial up the length of the Delay time (with a rang e from 20ms to 600ms), the amount of Sustain (delay repeats), and adjust the lev el of the delays in the Mix. A toggle switch engages built-in modulation that app lies anything from a slightly saturated, tape-like wow and flutter effect to a heavily pitch-shifted mod ulation effect to the delayed signal. Two internal trim pots allow adjustments to the Rate (sp eed ) and Width (sweep rang e) of the modulation. The true bypass footswitch triggers the LED lights in the bug les in the Maestro logo when it’s on, so you’ll always know when the effect is active.

• Controls: Delay, Mix, Sustain; internal Modulation Rate and Width trim pots
• Internal Trim Pots: Two internal trim pots allow the user to adjust the Rate (speed) and Width (sweep range) of the modulation that operates when the Mode switch is in the up (MOD-ON) position. Using a small screwdriver, turn clockwise to increase, counterclockwise to decrease the modulation Rate and Width.
• Switches: True Bypass footswitch, Mod On/Off Modulation Mode toggle switch
• LED Indicators: Red, yellow, and blue bugles in the Maestro logo illuminate when the pedal is active
• Signal Processing: All-Analog
• Delay Time Range: 20 ms - 600 ms
• Power Requirements: 9V battery or regulated 9VDC power supply (5.5 x 2.1mm plug, wired center -negative)
• Current Draw: 61.3 mA
• Power On Switch: Incorporated into the input jack. Unplug the input when not in use to prevent battery drain. Remove the battery when the pedal is going to be stored for long periods to prevent leakage and damage.
• Input Impedance: 470K ohms
• Output Impedance: 1K ohms
• Switching: True Bypass
• Dimensions (D x W x H): 5.04” x 3.45” x 2.5”, including feet, knobs, jacks, etc.
• Weight (Including Battery): 1.3 lb. / 589.67 gm

Comet Chorus Effects Pedal

The Comet uses iconic analog bucket brigade device (BBD) technology to deliver warm, classic chorus tones. This all-analog pedal boasts a Mode toggle switch for increased sonic versatility. The Earth mode provides an optimized, shimmering chorus effect, while Orbit mode adds some amplitude modulation to the chorused sound, more accurately simulating the sonic complexities of a rotary speaker. An internal trim pot lets you adjust the level of the rotary speaker Orbit effect to taste. The intuitive 3 -knob layout lets you quickly dial up the Depth (amount of pitch variation), Speed (modulation rate) of the chorusing, and adjust the amount of pitch modulated signal that is blended in with the dry signal by using the Mix control. The true bypass footswitch triggers the LED lights in the bugles in the Maestro logo when it’s on, so you’ll always know when the effect is active.

• Controls: Depth, Mix, Speed; internal Orbit amount trim pot
• Internal Trim Pot: The internal trim pot labelled Orbit allows the user to adjust the amount of the rotary speaker-style effect that is blended into the sound when the Mode Switch is in the Orbit position. Using a small screwdriver, turn clockwise to increase, counterclockwise to decrease the amount of the Orbit effect.
• Switches: True Bypass footswitch, Orbit/Earth Mode toggle switch
• LED Indicators: Red, yellow, and blue bugles in the Maestro logo illuminate when the pedal is active
• Signal Processing: All-Analog.
• Power Requirements: 9V battery or regulated 9VDC power supply (5.5 x 2.1mm plug, wired center negative)
• Current Draw: 55.4 mA
• Power On Switch: Incorporated into the input jack. Unplug the input when not in use to prevent battery drain. Remove the battery when the pedal is going to be stored for long periods to prevent leakage and damage.
• Input Impedance: 470K ohms
• Output Impedance: 1K ohms
• Switching: True Bypass
• Dimensions (D x W x H): 5.04” x 3.45” x 2.5”, including feet, knobs, jacks, etc.
• Weight (Including Battery): 1.2 lb. / 544.311 gm.