£269.00
Was: £289.00 - You Save: £20.00

In Stock: 8 Available

Order now for FREE Delivery on Tuesday

Add to wishlist

Product Overview

Industry standard microphone tailored to deliver warm and clear vocal reproduction with analogue transmission. read more

Looking to Spread the Cost?

Buy Now, Pay 2020

  • No Deposit
  • Pay nothing up to 12 months
  • Apply in minutes
View Buy Now Pay Later

Share this product

Frequently Bought Together


Product Overview

Manufacturer's ID: BLX24UK/SM58-K3E

Industry standard microphone tailored to deliver warm and clear vocal reproduction with analogue transmission.

Specification

  • General Specifications
    • Operating Range: 91 m ( line of sight - actual range depends on RF signal absorption, reflection and interference)
    • Available Frequencies: Between 524–865 MHz (available frequencies depend on applicable regulations in country where system used)
    • Audio Range: 50–15,000 Hz (dependent on microphone type)
    • Transmitter RF Output Power: 10 mW, typical (varies by region)
    • Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
    • Battery Life: Up to 14 hours
    • Dynamic Range: 100 dB A-weighted
    • System Distortion: 0.5% THD typical (ref. +/- 38 kHz deviation, 1 kHz tone)
    • Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
    • Power Requirements: BLX1, BLX2: 2 AA alkaline or rechargeable batteries
    • BLX4: 12–18 V DC at 150 mA, supplied by external power supply
  • Component Specifications:
    • BLX4 Receiver
      • Output Impedance:
      • - XLR connector 200 O
      • - 6.35 mm (1/4") connector: 50 O
      • Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone:
      • - XLR connector –27 dBV (into 100 kO load)
      • - 6.35 mm (1/4") connector –13 dBV (into 100 kO load)
      • RF Sensitivity: 105 dBm for 12 dB SINAD, typical
      • Image Rejection: >50 dB, typical
      • Dimensions: 40 mm X 188 mm X 103 mm (H x W x D)
      • Weight: 241 g
      • Housing: Molded ABS
      • Power Requirements: 12–15 V DC @ 160 mA, supplied by external power supply (tip positive)
    • BLX2 Handheld Transmitter
      • Audio Input Level
      • - gain 0dB: -20 dBV maximum
      • - gain -10dB: -10 dBV maximum
      • Gain Adjustment Range: 10 dB
      • RF Transmitter Output: 10 mW, typical, varies by region
      • Dimensions: 224 mm X 53 mm dia.
      • Weight: 218 g (without batteries)
      • Housing: Molded ABS
      • Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
      • Battery Life: up to 14 hours (alkaline)